LISE++ for A1900

LISE++ version 8.1 includes the configuration and option files used by the A1900 group as the default configuration:

• Configuration file A1900_2007.lcn contains the A1900 configuration with standard beam optics and the current detector systems installed in the separator.
• Option file A1900_2007.lopt sets options used for reaction mechanism, momentum distribution, and energy loss calculations.

LISE version 8.1 can be found at ftp://ftp.nscl.msu.edu/pub/lise/. If you have an older version installed on your computer, please uninstall LISE++ (Add/Remove Programs in the Control Panel) and then delete the C:\Program Files\LISE directory before you install the new software.

A step-by-step instruction (PDF) is available to guide NSCL users through calculations with LISE++.

New options for LISE++ 8.1

To use Fission or the RF Fragment Separator in LISE++, you should start with the provided example files:

Older files available

Configuration file: A1900_2006.lcn, Option file: A1900_2006.lopt, INI file: lisepp.ini
This was the recommended set of option files used in for LISE++ version 7.9.

Configuration file: A1900_2005B.lcn, Option file: A1900_2005B.lopt, INI file: lisepp.ini
This was the recommended set of option files used in for LISE++ version 7.5.

Configuration file: A1900_2005A.lcn, Option file: A1900_2005A.lopt, INI file: lisepp.ini
This was the recommended set of option files used in for LISE++ version 7.3.

Configuration file: A1900_2004A.lcn, Option file: A1900_2004A.lopt, INI file: lisepp.ini
This was the recommended set of option files used in for LISE++ version 6.6.

Configuration file: A1900_2003A.lcn, Option file: A1900_2003A.lopt, INI file: lisepp.ini
This was the recommended set of option files used in for LISE++ version 6.2.18 or later.

Configuration file: A1900_PAC27.lcn, Option file: A1900_PAC27.lopt, INI file: lisepp.ini
This was the recommended set of option files used in proposal preparation for NSCL PAC27. These files are identical to the A1900_2003A files.