Version 7.5 {============================= Main Part ======================================} [general] File = C:\Program Files\LISE\config\NSCL\A1900_2005B.lcn Date = 08-23-2005 Time = 12:00:00 Title = NSCL A1900 Fragment Separator 2005 (B) BlockStructure = DSWDMSWMMDSWDMSMMM [OpticsBeam] BX = 1 (±)mm ; one-half the horisontal beam extent (x) BT = 20 (±)mrad ; one-half the horisontal beam divergence(x') BY = 1 (±)mm ; one-half the vertical beam extent (y) BF = 20 (±)mrad ; one-half the vertical beam divergence (y') BL = 0 (±)mm BD = 0.07 (±)% ; one-half of the momentum spread (dp/p) AngleX = 0 mrad ; beam respect to the spectrometer axis AngleY = 0 mrad ; beam respect to the spectrometer axis Scheme Angle = 0 degrees [SlitsBeforeTarget] Shape = 1 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,15.00,50.0,15.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,15.00,50.0,15.00,50.0 ; joint,Bottom,B-limit,Top,T-limit {============================= BLOCK D1 - Dipole ======================================} [D1_General] Name = D1,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 8.719000 m ; Length block for optical blocks Before_Quad = 3 ; number of quadrupoles before optic device After_Quad = 3 ; number of quadrupoles after optic device QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = A1900\A1900_D1-Z026.cal [D1_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,100.00,150.0,100.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,100.00,150.0,100.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [D1_optics] row1 = -2.3037e+00,+9.2000e-03,+0.0000e+00,+0.0000e+00,+0.0000e+00,+2.8886e+01 row2 = +1.0756e+00,-4.3840e-01,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-04 row3 = +0.0000e+00,+0.0000e+00,+7.3810e-01,+2.3000e-03,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+3.7303e+00,+1.3663e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D1_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 60 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 40 mrad ; acceptance [D1_DipoleSettings] Brho = 3.48210 Tm ; magnetic rigidity Angle = 45 degrees Radius = 3.1 m {============================= BLOCK S1 - Drift ======================================} [S1_General] Name = I1_slits,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S1_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,100.00,100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,20.00,50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [S1_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S1_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S1_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK W1 - Wedge ======================================} [W1_General] Name = I1_wedge,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [W1_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; [W1_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,20.00,50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,20.00,50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [W1_WedgeSettings] ProfileMode = 1 ; 0-Wedge,1-Homo,2-Curved PhysProfileDesirable = 2 ; 0-Achrom,1-Monoch,2-user-defined Angle = 0.00000 mrad ; slope of wedge ProfileFileName = NULL Direction = 0 ; x=0, y=1 CalculateForBlock = NULL {============================= BLOCK D2 - Dipole ======================================} [D2_General] Name = D2,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 8.767000 m ; Length block for optical blocks Before_Quad = 3 ; number of quadrupoles before optic device After_Quad = 3 ; number of quadrupoles after optic device QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = A1900\A1900_D2-Z048.cal [D2_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,150.00,150.0,150.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,150.00,150.0,150.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [D2_optics] row1 = -1.0325e+00,-2.1600e-02,+0.0000e+00,+0.0000e+00,+0.0000e+00,-2.9301e+01 row2 = +3.5000e-03,-9.6850e-01,+0.0000e+00,+0.0000e+00,+0.0000e+00,-1.0110e-01 row3 = +0.0000e+00,+0.0000e+00,+1.1482e+00,-1.9000e-03,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+4.1151e+00,+8.6420e-01,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D2_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 30 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 60 mrad ; acceptance [D2_DipoleSettings] Brho = 3.48210 Tm ; magnetic rigidity Angle = -45 degrees Radius = 3.1 m {============================= BLOCK M1 - Material ======================================} [M1_General] Name = I2_PPAC0,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M1_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 1,2.2,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0 ; [0] choice - % or MeV, [1]=value; Resolution2 = 100,2.54,3.125 ns,mm,mm ; Time&X&Y space [M1_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,200.00,200.0,200.00,200.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,50.00,50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M1_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK S2 - Drift ======================================} [S2_General] Name = I2_slits,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S2_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,29.50,150.0,29.50,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,13.00,150.0,13.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [S2_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-05 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-05 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S2_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S2_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK W2 - Wedge ======================================} [W2_General] Name = I2_wedge,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [W2_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; [W2_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,150.00,150.0,150.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,150.00,150.0,150.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [W2_WedgeSettings] ProfileMode = 1 ; 0-Wedge,1-Homo,2-Curved PhysProfileDesirable = 2 ; 0-Achrom,1-Monoch,2-user-defined Angle = 0.00000 mrad ; slope of wedge ProfileFileName = NULL Direction = 0 ; x=0, y=1 CalculateForBlock = D4 {============================= BLOCK M2 - Material ======================================} [M2_General] Name = I2_PPAC1,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M2_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 1,2.2,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0 ; [0] choice - % or MeV, [1]=value; Resolution2 = 100,2.54,3.125 ns,mm,mm ; Time&X&Y space [M2_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,200.00,200.0,200.00,200.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,50.00,50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M2_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK M3 - Material ======================================} [M3_General] Name = I2_SCI,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M3_Compound] contents1 = 0,6,9,12.011 ; Nomer,Z,Atoms,Mass contents2 = 1,1,10,1.008 ; Nomer,Z,Atoms,Mass thickness = 1,30,1.032,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,5 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,5 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.1,15,100 ns,mm,mm ; Time&X&Y space [M3_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,175.00,175.0,175.00,175.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,30.00,30.0,30.00,30.0 ; joint,Bottom,B-limit,Top,T-limit [M3_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK D3 - Dipole ======================================} [D3_General] Name = D3,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 8.767000 m ; Length block for optical blocks Before_Quad = 3 ; number of quadrupoles before optic device After_Quad = 3 ; number of quadrupoles after optic device QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = A1900\A1900_D3-Z071.cal [D3_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,100.00,150.0,100.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,100.00,150.0,100.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [D3_optics] row1 = -9.6850e-01,-2.1600e-02,+0.0000e+00,+0.0000e+00,+0.0000e+00,-2.8375e+01 row2 = +3.5000e-03,-1.0325e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+2.0690e-01 row3 = +0.0000e+00,+0.0000e+00,+8.2030e-01,-9.7000e-03,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+4.2585e+00,+1.1686e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D3_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 30 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 55 mrad ; acceptance [D3_DipoleSettings] Brho = 3.48210 Tm ; magnetic rigidity Angle = -45 degrees Radius = 3.1 m {============================= BLOCK S3 - Drift ======================================} [S3_General] Name = I3_slits,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S3_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,100.00,100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,100.00,100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit [S3_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-05 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-05 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S3_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S3_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK W3 - Wedge ======================================} [W3_General] Name = I3_wedge,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [W3_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; [W3_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,150.00,150.0,150.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,150.00,150.0,150.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [W3_WedgeSettings] ProfileMode = 1 ; 0-Wedge,1-Homo,2-Curved PhysProfileDesirable = 2 ; 0-Achrom,1-Monoch,2-user-defined Angle = 0.00000 mrad ; slope of wedge ProfileFileName = NULL Direction = 0 ; x=0, y=1 CalculateForBlock = D4 {============================= BLOCK D4 - Dipole ======================================} [D4_General] Name = D4,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 9.227000 m ; Length block for optical blocks Before_Quad = 3 ; number of quadrupoles before optic device After_Quad = 3 ; number of quadrupoles after optic device QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = A1900\A1900_D4-Z093.cal [D4_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,100.00,150.0,100.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,100.00,150.0,100.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [D4_optics] row1 = -7.2600e-01,+1.5000e-02,+0.0000e+00,+0.0000e+00,+0.0000e+00,+2.0974e+01 row2 = +3.8200e-01,-1.3852e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,-1.1035e+01 row3 = +0.0000e+00,+0.0000e+00,+1.5931e+00,+1.3300e-02,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+3.0084e+00,+6.5280e-01,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D4_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 28 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 50 mrad ; acceptance [D4_DipoleSettings] Brho = 3.48210 Tm ; magnetic rigidity Angle = 45 degrees Radius = 3.1 m {============================= BLOCK M4 - Material ======================================} [M4_General] Name = FP_PPAC0,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M4_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 1,2,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0 ; [0] choice - % or MeV, [1]=value; Resolution2 = 1,1,1 ns,mm,mm ; Time&X&Y space [M4_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,50.00,50.0,50.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,50.00,50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M4_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK S4 - Drift ======================================} [S4_General] Name = FP_slits,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S4_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,25.00,25.0,25.00,25.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,25.00,25.0,25.00,25.0 ; joint,Bottom,B-limit,Top,T-limit [S4_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S4_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S4_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK M5 - Material ======================================} [M5_General] Name = FP_PIN,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M5_Compound] contents1 = 0,14,1,28.086 ; Nomer,Z,Atoms,Mass thickness = 0,470,2.321,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,2 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0.15 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.2,1,1 ns,mm,mm ; Time&X&Y space [M5_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,25.00,25.0,25.00,25.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,25.00,25.0,25.00,25.0 ; joint,Bottom,B-limit,Top,T-limit [M5_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK M6 - Material ======================================} [M6_General] Name = FP_PPAC1,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M6_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 1,2,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,1 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0 ; [0] choice - % or MeV, [1]=value; Resolution2 = 1,1,1 ns,mm,mm ; Time&X&Y space [M6_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,50.00,50.0,50.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,50.00,50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M6_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK M7 - Material ======================================} [M7_General] Name = FP_SCI,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M7_Compound] contents1 = 0,6,9,12.011 ; Nomer,Z,Atoms,Mass contents2 = 1,1,10,1.008 ; Nomer,Z,Atoms,Mass thickness = 4,100,1.032,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,50 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,5 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.2,100,100 ns,mm,mm ; Time&X&Y space [M7_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,75.00,75.0,75.00,75.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,50.00,50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M7_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension