Version 7.9.3 {============================= Main Part ======================================} [general] File = C:\user\c\lise_pp_76\config\NSCL\A1900_2006.lcn Date = 25-08-2006 Time = 12:06:23 Title = NSCL A1900 Fragment Separator 2006 BlockStructure = DSWDMSWMMDSWDMSMMM [OpticsBeam] BX = 1 (±)mm ; one-half the horisontal beam extent (x) BT = 6 (±)mrad ; one-half the horisontal beam divergence(x') BY = 1 (±)mm ; one-half the vertical beam extent (y) BF = 8 (±)mrad ; one-half the vertical beam divergence (y') BL = 0 (±)mm BD = 0.07 (±)% ; one-half of the momentum spread (dp/p) ShiftX = 0 mm ; beam respect to the spectrometer axis AngleX = 0 mrad ; beam respect to the spectrometer axis ShiftY = 0 mm ; beam respect to the spectrometer axis AngleY = 0 mrad ; beam respect to the spectrometer axis Scheme Angle = 0 degrees [SlitsBeforeTarget] Shape = 1 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,-15.00,-50.0,15.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-15.00,-50.0,15.00,50.0 ; joint,Bottom,B-limit,Top,T-limit {============================= BLOCK D1 - Dipole ======================================} [D1_General] Name = D1,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 8.719000 m ; Length block for optical blocks Before_Quad = 3 ; number of quadrupoles before optic device After_Quad = 3 ; number of quadrupoles after optic device QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = A1900\A1900_D1-Z026.cal [D1_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,-100.00,-150.0,100.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-100.00,-150.0,100.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [D1_optics] row1 = -2.3037e+00,+9.2000e-03,+0.0000e+00,+0.0000e+00,+0.0000e+00,+2.8886e+01 row2 = +1.0756e+00,-4.3840e-01,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-04 row3 = +0.0000e+00,+0.0000e+00,+7.3810e-01,+2.3000e-03,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+3.7303e+00,+1.3663e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D1_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 60 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 40 mrad ; acceptance [D1_DipoleSettings] Brho = 3.45705 Tm ; magnetic rigidity Angle = 45 degrees Radius = 3.1 m {============================= BLOCK S1 - Drift ======================================} [S1_General] Name = I1_slits,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S1_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [S1_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S1_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S1_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK W1 - Wedge ======================================} [W1_General] Name = I1_wedge,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [W1_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; [W1_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [W1_WedgeSettings] ProfileMode = 1 ; 0-Wedge,1-Homo,2-Curved PhysProfileDesirable = 2 ; 0-Achrom,1-Monoch,2-user-defined Angle = 0.00000 mrad ; wedge slope for the mode (0-Wedge) Direction = 0 ; x=0, y=1 CalculateForBlock = NULL ProfileFileName = NULL ExternalInternal = 0 ; external=0 / internal=1 ReadInternal = 0 ; 1 - Yes / 0 - No {============================= BLOCK D2 - Dipole ======================================} [D2_General] Name = D2,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 8.767000 m ; Length block for optical blocks Before_Quad = 3 ; number of quadrupoles before optic device After_Quad = 3 ; number of quadrupoles after optic device QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = A1900\A1900_D2-Z048.cal [D2_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,-150.00,-150.0,150.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-150.00,-150.0,150.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [D2_optics] row1 = -1.0325e+00,-2.1600e-02,+0.0000e+00,+0.0000e+00,+0.0000e+00,-2.9301e+01 row2 = +3.5000e-03,-9.6850e-01,+0.0000e+00,+0.0000e+00,+0.0000e+00,-1.0110e-01 row3 = +0.0000e+00,+0.0000e+00,+1.1482e+00,-1.9000e-03,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+4.1151e+00,+8.6420e-01,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D2_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 30 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 60 mrad ; acceptance [D2_DipoleSettings] Brho = 3.45705 Tm ; magnetic rigidity Angle = -45 degrees Radius = 3.1 m {============================= BLOCK M1 - Material ======================================} [M1_General] Name = I2_PPAC0,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M1_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 1,2.2,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0 ; [0] choice - % or MeV, [1]=value; Resolution2 = 1,2.54,3.125 ns,mm,mm ; Time&X&Y space [M1_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-200.00,-200.0,200.00,200.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M1_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK S2 - Drift ======================================} [S2_General] Name = I2_slits,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S2_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,-29.50,-150.0,29.50,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-13.00,-150.0,13.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [S2_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-05 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-05 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S2_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S2_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK W2 - Wedge ======================================} [W2_General] Name = I2_wedge,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [W2_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; [W2_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-150.00,-150.0,150.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-150.00,-150.0,150.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [W2_WedgeSettings] ProfileMode = 2 ; 0-Wedge,1-Homo,2-Curved PhysProfileDesirable = 2 ; 0-Achrom,1-Monoch,2-user-defined Angle = 0.00000 mrad ; wedge slope for the mode (0-Wedge) Direction = 0 ; x=0, y=1 CalculateForBlock = D4 ProfileFileName = NULL ExternalInternal = 1 ; external=0 / internal=1 ReadInternal = 1 ; 1 - Yes / 0 - No [W2_CurvedProfile] ; Version 6.6.3 19-07-2004 10:53:42 ; Block: Wedge_I2 Settings: 48Ni28+ Energy: 101.36 MeV/u ; Degrader: Al (740.19 micron) Dispersion: mm/% ; Mode: User-defined Wedge angle=-0.4356 mrad ; NP X0 L h e0 ; 32 175.00 350.00 163.20 663.96 ; Official NSCL curved degrader ;========================================================================== ; N X Thick H Tan 0 -175.0000 0.0000 163.2022 0.71552 1 -164.0625 0.0000 155.4440 0.70312 2 -153.1250 0.0000 147.8223 0.69057 3 -142.1875 0.0000 140.3388 0.67786 4 -131.2500 0.0000 132.9951 0.66499 5 -120.3125 0.0000 125.7932 0.65194 6 -109.3750 0.0000 118.7350 0.6387 7 -98.4375 0.0000 111.8226 0.62527 8 -87.5000 0.0000 105.0583 0.61163 9 -76.5625 0.0000 98.4444 0.59776 10 -65.6250 0.0000 91.9836 0.58365 11 -54.6875 0.0000 85.6785 0.56928 12 -43.7500 0.0000 79.5320 0.55464 13 -32.8125 0.0000 73.5474 0.53969 14 -21.8750 0.0000 67.7281 0.52441 15 -10.9375 0.0000 62.0779 0.50878 16 0.0000 0.0000 56.6008 0.49275 17 10.9375 0.0000 51.3013 0.47629 18 21.8750 0.0000 46.1845 0.45936 19 32.8125 0.0000 41.2557 0.44189 20 43.7500 0.0000 36.5213 0.42383 21 54.6875 0.0000 31.9882 0.40509 22 65.6250 0.0000 27.6643 0.38557 23 76.5625 0.0000 23.5588 0.36515 24 87.5000 0.0000 19.6825 0.34367 25 98.4375 0.0000 16.0481 0.32091 26 109.3750 0.0000 12.6712 0.29658 27 120.3125 0.0000 9.5713 0.27027 28 131.2500 0.0000 6.7736 0.24131 29 142.1875 0.0000 4.3131 0.20861 30 153.1250 0.0000 2.2425 0.17003 31 164.0625 0.0000 0.6563 0.12001 32 175.0000 0.0000 0.0000 0 {============================= BLOCK M2 - Material ======================================} [M2_General] Name = I2_PPAC1,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M2_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 1,2.2,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0 ; [0] choice - % or MeV, [1]=value; Resolution2 = 1,2.54,3.125 ns,mm,mm ; Time&X&Y space [M2_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-200.00,-200.0,200.00,200.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M2_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK M3 - Material ======================================} [M3_General] Name = I2_SCI,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M3_Compound] contents1 = 0,6,9,12.011 ; Nomer,Z,Atoms,Mass contents2 = 1,1,10,1.008 ; Nomer,Z,Atoms,Mass thickness = 1,30,1.032,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,5 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,5 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.1,15,100 ns,mm,mm ; Time&X&Y space [M3_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-175.00,-175.0,175.00,175.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-30.00,-30.0,30.00,30.0 ; joint,Bottom,B-limit,Top,T-limit [M3_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK D3 - Dipole ======================================} [D3_General] Name = D3,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 8.767000 m ; Length block for optical blocks Before_Quad = 3 ; number of quadrupoles before optic device After_Quad = 3 ; number of quadrupoles after optic device QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = A1900\A1900_D3-Z071.cal [D3_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,-100.00,-150.0,100.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-100.00,-150.0,100.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [D3_optics] row1 = -9.6850e-01,-2.1600e-02,+0.0000e+00,+0.0000e+00,+0.0000e+00,-2.8375e+01 row2 = +3.5000e-03,-1.0325e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+2.0690e-01 row3 = +0.0000e+00,+0.0000e+00,+8.2030e-01,-9.7000e-03,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+4.2585e+00,+1.1686e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D3_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 30 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 55 mrad ; acceptance [D3_DipoleSettings] Brho = 3.45705 Tm ; magnetic rigidity Angle = -45 degrees Radius = 3.1 m {============================= BLOCK S3 - Drift ======================================} [S3_General] Name = I3_slits,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S3_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit [S3_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-05 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e-05 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S3_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S3_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK W3 - Wedge ======================================} [W3_General] Name = I3_wedge,1 ; Name of Block, Constant name 1/0 Available = 0 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [W3_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; [W3_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-150.00,-150.0,150.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-150.00,-150.0,150.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [W3_WedgeSettings] ProfileMode = 1 ; 0-Wedge,1-Homo,2-Curved PhysProfileDesirable = 2 ; 0-Achrom,1-Monoch,2-user-defined Angle = 0.00000 mrad ; wedge slope for the mode (0-Wedge) Direction = 0 ; x=0, y=1 CalculateForBlock = D4 ProfileFileName = NULL ExternalInternal = 0 ; external=0 / internal=1 ReadInternal = 0 ; 1 - Yes / 0 - No {============================= BLOCK D4 - Dipole ======================================} [D4_General] Name = D4,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 9.227000 m ; Length block for optical blocks Before_Quad = 3 ; number of quadrupoles before optic device After_Quad = 3 ; number of quadrupoles after optic device QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = A1900\A1900_D4-Z093.cal [D4_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,-100.00,-150.0,100.00,150.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-100.00,-150.0,100.00,150.0 ; joint,Bottom,B-limit,Top,T-limit [D4_optics] row1 = -7.2600e-01,+1.5000e-02,+0.0000e+00,+0.0000e+00,+0.0000e+00,+2.0974e+01 row2 = +3.8200e-01,-1.3852e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,-1.1035e+01 row3 = +0.0000e+00,+0.0000e+00,+1.5931e+00,+1.3300e-02,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+3.0084e+00,+6.5280e-01,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D4_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 28 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 50 mrad ; acceptance [D4_DipoleSettings] Brho = 3.45705 Tm ; magnetic rigidity Angle = 45 degrees Radius = 3.1 m {============================= BLOCK M4 - Material ======================================} [M4_General] Name = FP_PPAC0,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M4_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 1,2,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0 ; [0] choice - % or MeV, [1]=value; Resolution2 = 1,1,1 ns,mm,mm ; Time&X&Y space [M4_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M4_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK S4 - Drift ======================================} [S4_General] Name = FP_slits,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S4_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,-25.00,-25.0,25.00,25.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-25.00,-25.0,25.00,25.0 ; joint,Bottom,B-limit,Top,T-limit [S4_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S4_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S4_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK M5 - Material ======================================} [M5_General] Name = FP_PIN,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M5_Compound] contents1 = 0,14,1,28.086 ; Nomer,Z,Atoms,Mass thickness = 0,470,2.321,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,2 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0.15 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.2,1,1 ns,mm,mm ; Time&X&Y space [M5_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-25.00,-25.0,25.00,25.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-25.00,-25.0,25.00,25.0 ; joint,Bottom,B-limit,Top,T-limit [M5_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK M6 - Material ======================================} [M6_General] Name = FP_PPAC1,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M6_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 1,2,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,1 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0 ; [0] choice - % or MeV, [1]=value; Resolution2 = 1,1,1 ns,mm,mm ; Time&X&Y space [M6_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M6_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension {============================= BLOCK M7 - Material ======================================} [M7_General] Name = FP_SCI,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M7_Compound] contents1 = 0,6,9,12.011 ; Nomer,Z,Atoms,Mass contents2 = 1,1,10,1.008 ; Nomer,Z,Atoms,Mass thickness = 4,100,1.032,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,50 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,5 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.2,100,100 ns,mm,mm ; Time&X&Y space [M7_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-75.00,-75.0,75.00,75.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M7_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension