| N | S | C | L | Our Lab | Science | Technology | Education | Our Future | SRF GROUP |
| Home | Directory | Contacts | Fast Facts | Feedback |
|
|
| High-pressure rinsing a single-cell cavity |
|
|
| Single-cell Nb cavity |
|
|
| Six-cell Nb cavity at Jefferson Lab |
|
|
| Nb half wave cavity during fabrication |
|
|
| High-pressure rinsing a half-wave resonator |
|
|
| Quarter-wave resonator after high-pressure rinsing |
|
|
| Six-Cell 805 MHz Elliptical cavity |
|
|
| 322 MHz Half-Wave resonator |
|
|
| 80.5 MHz Quarter-Wave resonator |
|
|
| Six-cell 805 MHz cavities in the clean room |
|
|
| Assembly of thermal shield for the cryomodule |
|
|
| Assembly of inner mu-metal shield for the cryomodule |
|
|
| Completed 805 MHz 2-cavity cryomodule |
|
|
| Cavities and magnets on rails in clean room |
|
|
| Assembly of cold mass onto top plate |
|
|
| Test fitting the thermal shield |
|
|
| Partially assembled cold box |
|
|
| Particle count monitoring in the clean room |
|
|
| Ultra-pure water system for the clean room |
|
|
| Preparations for testing a quarter-wave cavity from INFN Legnaro |
|
|
| Preparations for testing a quarter wave cavity from INFN Legnaro |
|
|
| Chemical etching of the half-wave resonator |
|
|
| Chemical etching of the 161 MHz quarter-wave resonator |
|
|
| Large grain niobium disk |
|
|
| Surface roughness measurement on a niobium sample |
|
|
| Surface texture measurement on a niobium sample |
|
|
| Pole figures for niobium texture measurements |
| National Superconducting Cyclotron Laboratory | |
|
Michigan State University
South Shaw Lane East Lansing, Michigan 48824-1321 USA |
Phone: 517-355-9671
Fax: 517-353-5967 Contact the NSCL |
|
| |